Van London – pHoenix Company
6103 Glenmont Dr.
Houston, TX 77081
USA
(Toll Free) 800-522-7920
(voice) 713-772-6641
(fax) 713-772-4671
Request Literature
|
|
|
|
|
|
The Model CS10 and CS51 conductivity electrodes are designed as a low cost, rugged, easy to install industrial sensor. This probe is engineered to minimize errors due to polarization effects and responds rapidly to varying temperatures.
|
- Small size enables convenient installation and service
- O-ring seals used on all versions for high on-stream reliability
- Plastic gland fitting allows removal and replacement without tools
|
 |
| APPLICATION NOTES |
|
Wetted materials of construction are 316 stainless steel and PEEK, with dual o-ring seals. The outer Viton® o-ring bears the brunt of process interface, allowing the back o-ring to maintain reliable sealing free from chemical attack. An integral temperature element, tailored to the analyzer of choice, allows automatic compensation for maximum accuracy. Leads are usually 10 feet with Spade Lug terminations.
Process connections are made via a bored-through swage fitting with ½” or ¾” NPT threads. This fitting can be screwed into a line or a tank, and it can also be turned around and connected to a standpipe for use in a submersion configuration. These sensors are for general purpose use up to about 20,000 micromhos (on most analyzers) and for pure water streams at low conductivity levels.
|
| |
| SPECIFICATIONS |
| Max. Pressure/Temp. Ratings: |
100 psig @ 100°C
200 psig @ 120°C w/316SS fitting |
| Connections: |
Stainless Steel Process Fitting - ½" NPT
Electrical - Spade Lug terminations on cable |
| Wetted Materials: |
Insulator - PEEK
O-rings - EPDM
Electrode - 316SS (std) |
| Probe Constant: |
0.01, 0.1, 1.0 |
| Temperature Compensation: |
Standard element is 10K ohms @ 25°C, for use with SDI, Uniloc, Myron L, Sensor Technology, Signet, ECD and others. |
|
 |
| ORDERING INFORMATION |
- To build your own part numbers, replace X's with selections listed in the drop down menu.
|
| C75 |
x |
x |
1 |
0 |
- |
xx |
SL |
| Accessories |
| 1500705 |
316 stainless steel ½" Gland Fitting |
| |
| |
| |
|
| |
| |
| |
Cell Constant |
Lead Length (even) |
| |
| |
1 0.01 |
Specify lead length in feet. |
| |
| |
2 0.1 |
| |
| |
4 1.0 |
| |
| |
| |
Temperature Compensator |
| |
0 None |
| |
4 720 ohm (L&N/Honeywell®) |
| |
9 8525 ohm (L&N/Honeywell®) |
| |
B 100 ohm (Platinum)(Rosemount®) |
| |
E 1000 ohm (Yokogawa®) |
| |
N 100 ohm (Nickel)(Yokogawa®) |
|
| Teflon is a trademark of E.I. Dupont de Nemour & Co. |
|
|
|
PRINT THIS PAGE
EMAIL THIS PAGE
pH