Mettler (Ingold®) Direct Replacements - Van London

This new line of direct replacements for Mettler Ingold®-style electrodes is now available for a wide variety of pH or ORP applications. They are designed dimensionally to retrofit with existing installations. Expensive equipment changes are no longer necessary.


Tuff-Fet™ pH w/ S8 Fitting	1" MPT Housing pH or ORP

Refillable pH or ORP w/ S7 Cap

Sealed pH or ORP w/ S8 Cap

Description
This new line of direct replacements for Mettler Ingold^®-style electrodes is now available for a wide variety of pH or ORP applications. They are designed dimensionally to retrofit with existing installations. Expensive equipment changes are no longer necessary. A combination of several reference fills or reference junctions are available to suit specific application requirements. Custom designs are not uncommon.

Design Features
The Solid Polymer Reference (SPR™) is Van London Co.'s polymer-based reference comparable to Ingold's^® Xerolyt™. Internal "shorting" is more inherent with an open-reference style electrode in pressurized applications. Unlike Ingold^®, Van London Co. pairs the SPR™ with a ceramic junction to eliminate possibilities of both electrode shorting and reference poisoning. For additional reliability, the gel is forced into the junction pores during the manufacturing process, virtually eliminating junction clogging by process particulate matter.

Specifications

*Measurement Types:*	GXV - Multi-purpose pH glass formulation (0-14.00 pH)
*Reference Types:*	SPR™ - Double junction, SOLID POLYMER REFERENCE (0-130°C) Tuff-Tip™ - New design incorporating larger reference junction surface area & electrode guard.

ORDRING INFORMATION:

- Sealed pH or ORP w/ S8 Cap Design (glass)

	I-100X	-	ZZZ	pH electrode
	79 X 6640	-	ZZZ	ORP electrode
	* X = Temperature Compensator Option
	* ZZZ = "A" Dimension in millimeters (refer to drawings above). Options are 120, 225, 325, 400 & 425

- 1" MPT Housing (Kynar™)

	V-500X	-	YYY	pH electrode
	16 X 6083G	-	YYY	ORP electrode
	* X = Temperature Compensator Option
	* YYY = Lead length in feet & Connector Option

- Tuff-Fet™ pH w/ S8 Fitting (Also see Tuff-Fet™ Spec Sheet)

	H135	-	ZZZ
	* ZZZ = "A" Dimension in millimeters (refer to drawings above). Options are 120 & 225

- Refillable pH or ORP w/ S8 Cap

	I-2000	-	DL	-	ZZZ	pH electrode
	I-2000	-	DL	-	ZZZ	ORP electrode
	* ZZZ = "A" Dimension in millimeters (refer to drawings above). Options are 120, 150, 200 & 250

* Temperature Compensator Options

	0 = None
	B = PT100
	I = 3K Balco

- Accessories Available

Wiring Adapters S8, S7 & K9 connectors 316 SS fittings for electrodes Calibration solutions				Transmitters Wiring diagrams

Note: Spinning Cap design is standard on S8 design with a dimension greater than 120mm.