|
Display
Simultaneous display of dissolved oxygen saturation/concentration and temperature; unit symbols as plaintext. Icons supply operating messages and signal unusual operating states. Status indicators provide information on the current operating status. Eye-catching alarm signaling by red, flashing LED.
Calibration
Reliable reminder due to integrated calibration timer. Automatic sensor standardization with check of response time and drift. Conventional calibration media can be selected. Alternatively, also manual calibration or direct input of sensor data for service purposes. Display of the sensor data of every calibration. Evaluation of the sensor status with Sensoface®.
Sensocheck® sensor monitoring
Maximum reliability due to continuous monitoring sensor data. Sensor defects are recognized, indicated in the display, and an alarm is released.
FOUNDATION fieldbus interface (FF)
All device parameters can be read and written. Cyclic transmission of 3 measured values is possible (selection from saturation (DO), concentration (DO), temperature, zero, slope, concentration (gas)). A product calibration can be performed via the bus interface using a device management tool.
|
PRINT THIS PAGE
EMAIL THIS PAGE
pH