Ceramat® WA 150 - Van London

Pneumatic Retractable Fittings.

Inline version with application-specific process adaptation.

Inline version with application-specific process adaptation

Facts
– for extreme applications
– ceramic sealing to the process:
  • extremely high hardness (Mohs hardness 9) prevents wear on the sealing surfaces in abrasive media
  • virtually wear-resistant
  • high and constant tightness due to lapped and polished sealing surfaces
  • high mechanical strength
  • high temperature resistance
  • high chemical resistance
  • sterilizable
– very high availability
– Plug & Play for all process media thanks to central multiplug
– smooth, dirt-proof design
– all maintenance can be performed on site
– drive easily replaceable under process conditions
– cyclone rinsing for optimum cleaning effect
– 2 independent barriers with cavity rinsing
– sensor dismount guard in conjunction with Uniclean® 900/Unical® 9000
– superior sensor immersion depth
– standard sensor length (225 mm)
– special version for electrodes with pressurizable liquid electrolyte (for 250-mm electrodes with electrolyte reservoir)
– process-wetted outer body, PVDF or PEEK, carbon-fiber reinforced

Specifications
Permitted process temp	5 … 120 °C, for sterilization 130 … 140 °C
Permitted process pressure	6 bars gauge pressure at 120 °C
Sensors	225 mm, Pg 13.5 coupling, 250 mm for pressurized liquid-electrolyte sensors
Air supply	(4) 5* … 7 bars, filtered 10 … 25 μm, oil- and condensate-free
Immersion depth	approx. 135 mm, measured from lower edge of flange to sensor tip
Process adaptations	flanges: DN 50/DN 65/DN 80/DN 100 flange, DN 65/80, EPDM pneumatic deposit remover (see page 285) dairy-pipe screw joint DN 50 / DN 65 / DN 80 / DN 100 Varivent DN 50 … 125 mm
Outlet	connection for hose grommet with coupling (Unical® 9000 / Uniclean® 900) internal shut-off by ceramic disks
Inlet	multiplug connection for Unical® / Uniclean® internal shut-off by ceramic disks
Special functions	rinsing of inner cavities
Process-wetted materials	PEEK, carbon-fiber reinforced, or PVDF, carbon-fiber reinforced; ceramic (aluminum oxide); O-rings made of EPDM, FKM, or FFKM
Enclosure	stainless steel 1.4571
Tightness	IP 66
Connection to Uniclean® 900 / Unical® 9000	compact multiplug connection
Sensor protection in the process	integrated sensor protection made of PVDF (carbon-fiber reinforced) or PEEK (carbon-fiber reinforced)
Limit switches	noncontacting electrical limit position control in conjunction with Unical® 9000 / Uniclean® 900 or ZU 0631 Standard Media Interface
Certificates	3.1 Material Certificate (optional) ATEX II 1 GD c II
* with sticky media containing particles