Flow-Through Dissolved Oxygen Assembly - Van London

This Dissolved Oxygen system is designed for O₂ measurements in a continuous flow-through environment. The cell and O₂ electrode are designed to be steam sterilized in the autoclave with the electrode installed. The O₂ electrode system is compatible with most common O₂ amplifiers.

This Dissolved Oxygen system is designed for O₂ measurements in a continuous flow-through environment. The Van London Co. flow-through dissolved oxygen cell is available in a 6000 µL flow-through cell with ¼” tube connection.

The flow cell is constructed of 316L stainless steel or ultem plastic. The cell and O₂ electrode are designed to be steam sterilized in the autoclave with the electrode installed.

Dissolved oxygen electrodes are available in both polarographic and galvanic styles to fill all requirements. The O₂ electrode system is compatible with most common O₂ amplifiers.

GALVANIC D.O. PRODUCT WARNINGS

WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

The polarographic dissolved oxygen electrodes are available without temperature compensation. If temperature compensation is needed, a separate temperature compensator is required. Temperature compensation is not normally required when calibration is made at a controlled temperature.

SPECIFICATIONS

Type	O25IP18 Polarographic	O25NG18 Galvanic
Cathode	Pt	Pt
Anode	Ag	Ag
Response	98% in 60 seconds	98% in 90 seconds
Stability*	better than 2%	better than 2%
Temperature Compensation	No	No
Temperature Range	0-60°C	0-60°C
Sterilization Temperature	130°C	130°C
Residual Signal	Less than 1 nA	Less than 0.4 µA
Signal Output**	40 nA	20 mV

* constant temperature	** medium saturated with air

ELECTRODES

DESCRIPTION
O25IP25-120-10	Polarographic electrode (order flow cell separately)
015NG25-120-10	Galvanic electrode (order flow cell separately)
8001020	Glass flow-through temperature compensator
8001025	Glass flow-through temperature compensator PT100 Ohm RTD

FLOW-THROUGH CELLS

PART NUMBER	DESCRIPTION
1051001	316L Stainless Steel flow cell, 6000 µL (other sizes available upon special order)
1001010	Ultem flow cell, 6000 µL (other sizes available upon special order)

ACCESSORIES

PART NUMBER	DESCRIPTION
M0500P1-K5	Membrane service kit for polarographic electrodes, includes three membrane cartridges, filling solution, and O-rings.
M0500NG1-K1	Membrane service kit for galvanic electrodes, includes three membrane cartridges, filling solution, and O-rings.
M0500P2-M6	One replacement polarographic membrane cartridge and O-rings
M050NG1-M1	One replacement galvanic membrane cartridge and O-rings
R001068	Filling solution - 125 mL for polarographic electrodes
R001069	Filling solution - 125 mL for galvanic electrodes

CABLES

PART NUMBER	DESCRIPTION
9001091-010B	BNC Connector
9001091-010I	DIN Connector
9001091-010D	Dual Pin Connector
9001091-010U	Banana Pulgs
9001091-010T	No Connector
9001091-010CC	Custom cable with choice of plug, lemo connector. Specify size and pin number.