Van London Company LogoVan London Company, your source for pH, ORP (Oxidation-Reduction Potential), Conductivity, Oxygen, and Ion Selective Electrodes, for Laboratory, Biotechnology and Medical Applications
pHORPRedoxIon SelectiveConductivityDissolved OxygenOther ProductsTechnical InfoAbout Van London-pHoenix CompanyContact Van London-pHoenix Company

London-pHoenix Co. Customer Login
Username

Password

Not Registered Yet?

 

Van London Company
10540 Rockley Road
Houston, TX 77099
USA

(Toll Free) 800-522-7920
(voice) 832-456-6641
(fax) 832-456-6642

Request Literature

IC 7685 Ion Concentration Controller TEXT SIZE: A A A    PRINT THIS PAGE   EMAIL THIS PAGE

Ion Concentration Controller compatible with Ion Selective Sensors of all types for continuous operation.

IC 7685
Ion Concentration controller

IC 7685 Ion Concentration Controller

 

· Applications:
- with ISE electrodes
- water softeners
- drinking water
- electroplating industry
- Aluminum surface coating
- CO2 in biotechnology

 

· Input from any ISE and CO2 electrodes
· Input from PT100 3 wires

· Measuring unit: PPM - mg/l - gr/l - mbar - mmHg
· Measuring range from 0.01 to 1000
· Autoranging
· Up to 5 points calibration

· Temperature readout
· Calibration parameters display
· Dual set-point and alarm conditions display
· Automatic or manual temperature compensation
· Dual filter software

· Isolated output:
- 0/20 mA or 4/20 mA selectable
- programmable input on the span
- dual output as option

· Automatic or manual operation
· Dual set-point with hysteresis, delay, and min/max programmable functions

· Alarm:
- continuous/flashing
- min/max and delay programmable
- on set-points timing

Specifications

 

Operating mode
Automatic/manual

ISE input
* Ion type: X-, X--, X+, X++
  Measuring scales: 5 decades from 0.01 to 1000

* Scales
10.00 - 100.0 - 1000 autoranging
Software filter 90% RT: 0.4/20.00 s for small/large variations

Calibration
Up to 5 points over the entire measuring range
Zero adjustment: +/- 100.0 mV
Range: +/- 1100 mV

Temperature
Input: RTD Pt100 3 wires
Measuring range: -10.0/110.0 °C
Resolution: +/- 0.1 °C
Zero: +/- 2 °C
Manual Temperature: -10/110 °C

Temperature compensation
Selectable: able/disable
Compensation range: -10/110 °C
Reference Temperature: 20 °C

Option 091.4143
9/36 VDC power supply

* The technical specifications may be changed without notice.

· EEPROM parameters storage
· Automatic overload protection and reset
· Extractable terminal blocks
· 96X96 (1/4" DIN) housing

Accessories:

This controller may be used with all ISE sensors for continuous operation.