skip to: page content | links on this page | site navigation | footer (site information)
small logo

RETRACTABLE LOCK-N-LOAD SENSOR ASSEMBLYDownload as PDF

RETRACTABLE LOCK-N-LOAD
SENSOR ASSEMBLY
 
6103 GLENMONT · HOUSTON, TEXAS · 77081
800/522-7920 · FAX: 713/772-4671 · 713/772-6641
www.VL-PC.com
 
Retractable Lock-N-Load Sensor Assembly RETRACTABLE LOCK-N-LOAD SENSOR ASSEMBLY
All you need to do is Lock-N-Load to install a pH or ORP electrode into any pipeline. This is the first in-line assembly that doesn't require ball valves, cables, or costly, complex hardware to quickly insert or remove an electrode from a pipeline without interrupting the process. The simplicity of its design is what makes it unique. A quarter turn, a pull, and the electrode is isolated from line pressure. The electrode can now be removed to check calibration. Available in a variety of materials including CPVC, Kynar and Stainless Steel. A wide selection of pH and ORP electrodes are available for the retractable sensor assembly.
Lock-N-Load Installed in Flow Cell
 
Sensor Assembly in Operation Sensor Assembly Out of Operation
for Electrode Removal
Lock-N-Load Sensor Assembly In and Out of Operation
 
ORDERING SPECIFICATIONS
 
Lock-N-Load Specification
 
Retractable Lock-N-Load Assembly with 1½" MNPT Fitting
Part NumberMaterialThread Size Pressure RangeTemperature Range
 
1921020
1961020
1951020
 		  
CPVC
Kynar
316 SS
 		  
1½" MNPT
1½" MNPT
1.0" MNPT
 		  
100 PSI
100 PSI
125 PSI
 		  
-5° to 80°C
-5° to 100°C
-5° to 120°C
 
* V-000B-20H-213   pH Electrode with 20 feet of lead wire and PT100 ohm temperature compensator.
* Electrode sold separately
 

FOR ADDITIONAL PRODUCT INFORMATION,
CALL 713/772-6641 OR 800/522-7920
E-mail: sales@VL-PC.com
www.VL-PC.com


 
©2008 Van London-pHoenix Company