|
|
- Low Cost Replacements
Long-lasting, reliable, and low in cost for pH and ORP sensors. Twist-Lock housing design allows for an all-in-one electrode
or sensor replacement to reduce inventory requirements.
|
- Housing Features
¼ turn is all that is required for installation. The housing is ribbed for easy handling.
- O-ring Arrangement
Dual external o-rings and an internal o-ring seal the electrode from any process leakage.
- Quality "Built In"
All parts meet strict, documented quality specifications, followed through each step of the manufacturing process.
|
- Safe Operation
A stop pin is installed in the adapters for positive electrode/sensor positioning; locking pins on the housing are visible
through an opening 90° from the removal slots to assure correct installation.
|
|
| |
| DESCRIPTION |
| |
| |
The Twist-Lock™ sensor and adapter is designed to convert a standard pipe tee into a low cost, low maintenance flow-through sensor assembly.
Only a ¼ turn is required for field maintenance or sensor replacement; threading is eliminated. The adapter is available in a variety of materials & connection sizes
for easy installation.
|
| |
| APPLICATION |
| |
| |
The Van London-Phoenix Co. Twist-Lock™ mounting system provides continuous pH, ORP, or Conductivity monitoring with safe and convenient
service capability for any flow-through system. Typical installations include by-pass streams, sample systems, or sensor stations.
|
| |
| SPECIFICATIONS |
| |
| | Pressure Rating: | 150 PSI |
| | Temperature Range: | * 130°C (266°F) |
| | Process Connections: | ½:, ¾", 1" and 1½" |
| | Conduit Connection: | ¾" MPT |
| | O-Ring Seals: | **Viton™ (standard) |
| | pH Range: | 0-14 |
| | Reference Style: Double junction Ag/AgCl with Solid Polymer Reference
* Recommend metalic Twist-Lock adapter for process temperatures above 80°C (176°F)
** Other Materials available
|
|
| |
| Dimensional and Mounting Detail |
| |
 |
 |
|
| ORDERING INFORMATION |
| |
- Adapters, tees, electrodes and sensors are all sold separately. A Twist-Lock adapter is required for initial installation.
- To build your own part number, first determine the electrode or sensor style required and then replace X's, Z's,
and Q's with selections listed in the drop-down menus on the back page.
- Call the factory if electrode application assisstance is required. Conversion information is also available for quick replacement of
existing installations.
|
| |
| pH SENSOR SELECTION |
| |
|
| V100 | Z - | XX |
QQ: | Twist-Lock pH Electrode (Ryton®) |
| V110 | Z - | XX |
QQ: | Twist-Lock pH Electrode (Ryton®) & 316 SS Solution Ground) |
| V120 | Z - | XX |
QQ: | Twist-Lock pH Electrode (Kynar®) |
| V130 | Z - | XX |
QQ: | Twist-Lock pH Electrode (Teflon®) |
| | | | | | | |
| | | | | | Connector Type |
| | | | | | B BNC |
| | | | | | H Stripped & Soldered Wire Tips |
| | | | | | BH Male BNC & Hanked (tinned) |
| | | | | | F 4-Pin Military (Male) |
| | | | | |
| | | | Lead Length |
| | | | Specify lead length in even feet. |
| | | |
| | Automatic Temperature Compensator (ATC) |
| | 1 3,000 ohm |
| | 7 300 ohm |
| | 9 8,525 ohm |
| | B 100 ohm |
| | E 1,000 ohm |
|
|
|
| | 1906644 - | XXQQ: |
Twist-Lock ORP ELECTRODE (Ryton®) |
| |
| Temperature Compensator Optional |
|
| |
| CONNECTORS |
 |  |
 |
 |
| BNC | Hanked |
BNC & Hanked | Type F |
| |
|
| ELECTRODE SOLUTIONS |
| |
| |
9210038 | 4.00pH, 7.00pH and Deionized Water rinse (1 pint each) |
| |
9210037 | 4.00pH, 7.00pH and 10.00pH (1 pint each) |
| |
9210039 | 7.00pH and 10.00pH and Deionized Water rinse (1 pint each) |
| |
9210079 | Anti-fouling solution to reduce electrode-coating problems |
| |
9210008-125 | Electrode storage solution KCl/4.00 pH buffer (125 ml) |
| |
| TWIST-LOCK ADAPTERS |
| |
|
| |
| 1600143 | : Kynar Twist-Lock Adapter, 1" MPT |
| 1600143G | : Kynar Twist-Lock Adapter, 1" MPT Guarded |
| 1600142 | : Kynar Twist-Lock Adapter, ¾" MPT |
| 1600142G | : Kynar Twist-Lock Adapter, ¾" MPT Guarded |
| 1500143 | : Stainless Steel Twist-Lock Adapter, 1" MPT |
| 1500143G | : Stainless Steel Twist-Lock Adapter, 1" MPT Guarded |
| 1500142 | : Stainless Steel Twist-Lock Adapter, ¾" MPT |
| 1500142G | : Stainless Steel Twist-Lock Adapter, ¾" MPT Guarded |
| PIPE TEES |
| |
| 1502203 | : Stainless Steel Pipe Tee, 1" FPT |
| 1502202 | : Stainless Steel Pipe Tee, ¾" FPT |
| 1602203 | : Kynar Pipe Tee, 1" FPT |
| 1602202 | : Kynar Pipe Tee, ¾" FPT |
Other accessories and materials are available.
Consult factory for options. |
|
| |
| TRANSMITTER REFERENCE GUIDE |
|
| Transmitter | Temp. Comp. | Cable Connector |
| |
| Yokogawa | B | H |
| ABB/TBI 515 | 1 | BS |
| ABB/TBI TB82 & TB84 | B | H |
| Rosemount: |
| 1181 w/preamp in transmitter | * | SL |
| 1181 w/remote preamp | * | BH |
| 2081, 3081, 4081, 5081, 1055 & XMT | B | H |
| Honeywell w/preamp | 9 | H |
| Ingold/Mettler Toledo | B | H |
| Endress & Hauser | B | H |
| Foxboro | B | H |
| Great Lakes Inst. | B (conventional) | H |
| Great Lakes Inst. | 7 (differential) | |
| * Preamp depandant - Consult Van London-Phoenix Sales Staff. |
|
| Additional electrode styles, materials, buffer solutions & wiring adapters are available. |
|
| |
|
FOR ADDITIONAL PRODUCT INFORMATION,
CALL 713/772-6641 OR 800/522-7920
E-mail: sales@VL-PC.com
www.VL-PC.com
|
| Ryton is a trademark of Phillips 66 Company |
SPR and Twist-Lock are trademarks of the Van London-Phoenix Co. |
| Teflon and Viton are both trademarks of E.I. du Pont de Nemours & Co. |
|
